Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

利用选择性激发核磁共振对混合物中的两种化合物进行结构解析

利用现代NMR的1D、2D技术对一个混合物进行了分析。结果表明：混合物由两种化合物组成。为了同时准确确定两种化合物的结构，本工作应用了1D-TOCSY技术，利用该技术选择性强的特点来补充常规的1D、2DHMR实验所提供的分子结构的信息。在没有进行预分离的条件下，顺利地完成了样品中两种化合物的核磁信号归属，并最终确定了它们的结构。     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Cu-Zn-Sn体系富Sn区液相限的研究

近些年来,无铅低熔点填料日渐引起人们的兴趣,且将得到广泛的应用。Cu-Zn-Sn合金正是无铅低熔点填料的一种基本合金。该体系相图虽有一些报道,但他们的研究只涉及富铜区(>50Wt％)的液相限和等温截面(500℃)。我们颇感兴趣的富Sn区的液相限,尚未见文献报道,因此测定该体系富Sn区的液相限是必要的。关于Cu-Zn-Sn体系的三个相关二元体系,已有文献报道,也较成熟。对于Cu-Zn体系,富Zn区600℃以下存在两个转熔反应,其转熔点分别为Q(～88Wt％Zn,598℃),W(97.5-98.5Wt％Zn,424℃);Cu-Sn体系富Sn区有一个转熔反应,其转熔点     

Ion Association of Cadmium Acetate from Conductivity Measurements

Conductivity of cadmium acetate over the concentration range of 10^?4 to 10^?3M was measured at 25°C. The approximate dissociation constant of CdAc₂ in dilute aqueous solution was estimated from the relation, α=[Λ?36.5+39√C(1+2α)]/[57.9?93√C(1+2α)]. The limiting value of log₁₀K for the association constant of CdAc⁺ ion was evaluated to be 1.75 at 25°C.     

Determination of trace scandium by ion-exchanger phase spectrophotometry withp-nitrochlorophosphonazo

Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 10⁵ 1 mol^–1 cm^–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.     

A new route to semirigid poly(amide-ester)s with ordered structure

Four novel semirigid poly(amide-ester)s having the same ordered amide-amide-ester-ester (-AAEE-) and the same or the different phenyl structure were synthesized from the various combination of active acylamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT) and 1,1′-(terephthaloyl)bisbenzotriazole (PBBT) with diols such as N,N'-bis(2-hydroxyethyl)isophthamide (HEIPA) and N,N'-bis(2-hydroxyethyl)terephthamide (HEPTA) which prepared from the selective N-acylation of IPBBT or PBBT with aminoethanol in excellent yield at room temperature. Before the preparation of diol monomers, a model reaction of selective N-acylation was also completed from active monoacylamide of benzotriazole, 1-benzoylbenzotriazole with aminoethanol. The ordered structure of poly(amideester)s were characterized by infrared (IR) and NMR spectra. On the bases of different reactivity between selective N-acylation and O-acylation of active acylamide of benzotriazole, poly(amide-ester)s having the ordered AAEE and the same phenyl structure were also readily synthesized from the IPBBT or PBBT with aminoethanol under mild conditions by one-bath process.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.